What Is Fab Utilization? Why a Full Line Is Not Spare Wafers
Fab utilization is wafers out divided by a foundry's capacity. UMC printed 92% for the third quarter of 2026. The shipment line is a different number.
EXPLAINED · Mechanism · Last reviewed: 19 Nov 2026 · Next review: UMC's fourth-quarter 2026 results, when utilization, wafer shipments, and capacity are reprinted
Fab utilization is the share of a foundry's wafer capacity that comes out as wafers in the period. On the releases below, the numerator is wafers out and the denominator is capacity.
In short. A printed rate is a company total. It is not a pile of idle wafers, and it is not semiconductor yield. In the third quarter of 2026 UMC printed 92% and SMIC printed 97.3%. TSMC's management report for the same quarter prints shipments and inventory days, and it does not print a utilization rate. Our read: the stuck step is the loaded line, which a company-wide percentage can hide.
Why an investor cares: the foundry is paid when the wafer comes out, and the tool depreciates whether the next wafer fits. The wafers sit on the Semiconductors layer.
What is fab utilization?
Fab utilization is wafers out divided by capacity, on the wafer size that foundry uses as its equivalent. Lose the definition and the percentage is just a headline.
UMC prints the formula in its third-quarter 2026 earnings release of 28 October 2026. Utilization rate equals quarterly wafer out divided by quarterly capacity. SMIC prints a different sentence in its unaudited results for the three months ended 30 September 2026, filed with the Hong Kong exchange on 12 November 2026. Its rate is total wafers out divided by estimated total quarterly capacity.
UMC's capacity line is a quarterly total in 12-inch equivalent wafers. SMIC's is a month-end monthly figure in 8-inch equivalent wafers. TSMC and GlobalFoundries count 12-inch wafers, the same size as 300 millimetre. Adding those counts mixes two rulers. UMC also says its capacity is a calculated maximum output, and that delivery, process migration, and the ramp can move the actual number. The rate uses that calculated maximum. It does not name the full tool.
What did UMC print for the third quarter of 2026?
UMC's release puts the third-quarter utilization rate at 92%. Wafer shipments rose 7.3% from the prior quarter to 1,212 thousand 12-inch equivalent wafers. Quarterly capacity was 1,325 thousand. Revenue was NT$74.24 billion, which the release converts at 31.99 to US$2.32 billion. Gross margin was 34.0%. Operating margin was 25.1%.
The same release prints the prior four quarters beside it.
| 3Q26 | 2Q26 | 1Q26 | 4Q25 | 3Q25 | |
|---|---|---|---|---|---|
| Wafer shipments (12-inch thousand equivalents) | 1,212 | 1,129 | 1,021 | 994 | 1,000 |
| Utilization rate | 92% | 85% | 79% | 78% | 78% |
| Total capacity (12-inch thousand equivalents) | 1,325 | 1,305 | 1,283 | 1,305 | 1,305 |
Our arithmetic on the shipment change matches the printed 7.3%.
Jason Wang, UMC's chief executive, said several 12-inch fabs were at full capacity and that 8-inch operations saw a strong recovery. He also said 22-nanometre revenue was 18.3% of wafer sales, and that 22-nanometre and 28-nanometre together were 35%. The company rate of 92% and the sentence "several 12-inch fabs operating at full capacity" are both in the same release.
Fourth-quarter guidance in the release is a low-single-digit rise in shipments, a firm US-dollar selling price, a gross margin comparable to this quarter, and utilization in the low-90% range. Guided capacity is 1,337 thousand, from 1,325 thousand. The 2026 capital-expenditure outlook on that page is US$2.0 billion. The board, separately, approved an additional budget of about US$3.2 billion for a faster build in Singapore and Tainan. The outlook and the added budget are different lines.
Why does 1,212 divided by 1,325 not equal 92%?
Because the numerator in UMC's formula is quarterly wafer out. The 1,212 thousand figure is wafer shipments. The release prints both, and it does not print wafer out as its own line.
Our arithmetic, which the release does not print: 1,212 divided by 1,325 is 0.9147, or 91.5% to one decimal. That is the shipment count over the capacity count. It is not the utilization rate UMC prints, which is 92%, defined on wafer out.
We do not invent the wafer-out number that would make the formula land on 92%. The release is silent on that input. The useful fact is the gap: a reader who divides the two printed operating lines will not recover the printed rate.
What did SMIC print for the same quarter?
SMIC's release puts third-quarter revenue at US$3,190.0 million, against US$3,005.6 million in the second quarter and US$2,381.8 million a year earlier. Gross margin was 29.9%, against 25.3% and 22.0%. The release says the margin move from the second quarter was due to the increase in the utilization rate and the product-mix change.
The operating table prints wafer shipments of 3,033,683 standard logic 8-inch equivalent wafers, up 5.7% from 2,869,495, and a utilization rate of 97.3%, against 93.7% in the second quarter and 95.8% a year earlier. Monthly capacity increased to 1,116,750 standard logic 8-inch equivalent wafers, from 1,096,500. Wafers were 95.9% of revenue. China was 90.8% of revenue.
Shipments and month-end capacity do not reconstruct 97.3%. The note defines the rate on wafers out and estimated quarterly capacity. It prints neither input. It prints shipments, and it prints month-end monthly capacity.
Our arithmetic, which the release does not print: three times 1,116,750 is 3,350,250, and 3,033,683 divided by 3,350,250 is 0.9055, or 90.6%. That is shipments over three times month-end capacity. It is not 97.3%. We do not invent the wafers-out figure that would land on the printed rate.
Depreciation inside cost of sales was US$945.8 million, up 2.3% from US$924.8 million. Cost of sales itself was US$2,236.8 million, down 0.4% from US$2,244.9 million. The tools kept depreciating. The release attributes the margin improvement to utilization and mix, while that depreciation line rose. Capital expenditure was US$1,094.3 million, against US$1,835.7 million in the second quarter, in a quarter when month-end capacity still rose.
Fourth-quarter guidance in the release is a sequential revenue increase of 4% to 6%, and a gross margin of 26% to 28%. The release does not print a fourth-quarter utilization rate.
What does TSMC print instead?
TSMC's quarterly management report for the third quarter of 2026, dated 15 October 2026, prints wafer shipments of 4,476 thousand 12-inch equivalent wafers, against 4,336 thousand in the second quarter. Our arithmetic on that change is 3.2%, which is the change the report prints.
Days of inventory were 82, down 5 days from 87, which the report ties to the rise in wafer shipments. Gross margin was 66.4%, down 1.3 points, which the report ties to dilution from the initial ramp of N2. Capital expenditure was US$13.84 billion. Depreciation and amortization in the cash-flow bridge was NT$220.20 billion.
The report does not print a utilization rate. We do not estimate one.
What does GlobalFoundries print instead?
GlobalFoundries' Form 6-K exhibit for the quarter ended 30 September 2026, filed on 4 November 2026, prints net revenue of US$1,899 million. It says wafer shipment volumes rose 7.5% year over year to 647 thousand 300-millimetre equivalent wafers. Gross margin was 30.1%, against 24.8% a year earlier. The exhibit attributes that margin increase to product mix, lower depreciation and amortization, improved fixed-cost absorption, manufacturing productivity, and cost savings.
Fixed-cost absorption is the accounting cousin of a fuller fab: a wafer that comes out carries a share of the tools' cost. The exhibit still does not print a utilization percentage.
On the nine months, the exhibit says the gross-margin increase was partly offset by lower customer underutilization payments. That is a payment line. The exhibit does not define it here, and it does not print it as a quarterly rate.
Who gets paid — and where is the stuck step?
Our read: the foundry is paid for the wafer that comes out. SMIC says wafers were 95.9% of revenue. The toolmaker is paid when the denominator grows, often on an earlier quarter's order.
The stuck step is the loaded line. UMC printed 92% and, in the same release, said several 12-inch fabs were full, and that it is converting other capacity toward advanced packaging and silicon photonics because that demand is unfulfilled. The gap between 92% and a full fab is not a stack of wafers a buyer can book on the full flow.
SMIC shows the cash effect without naming the tool. Gross margin rose while depreciation inside cost of sales rose 2.3% and cost of sales fell 0.4%. Month-end capacity rose by 20,250 wafers a month while capital expenditure fell from US$1,835.7 million to US$1,094.3 million. The capacity that arrived was ordered earlier.
TSMC's margin sentence names the N2 ramp. Its tool clock is the US$13.84 billion of capital expenditure and the NT$220.20 billion of depreciation and amortization. Inventory days moved with shipments. That is not a utilization rate.
Who owns the fab and who only books it is fabless versus IDM. The blank the wafer is cut from is a silicon wafer. The room the rate is measured in is a clean room.
What would change this view?
- UMC printing quarterly wafer out, so a reader can recompute 92% from the formula instead of from shipments.
- SMIC printing wafers out and estimated quarterly capacity, so a reader can recompute 97.3%.
- A TSMC management report that prints a utilization rate. The third-quarter 2026 report does not.
- A quarter in which UMC's company rate and its 12-inch fabs describe the same loading. This release has 92% and several 12-inch fabs at full capacity in the same document.
Common misconceptions
- People assume 92% means 8% of the wafers are spare. Actually UMC said several 12-inch fabs were at full capacity, and that it is converting other capacity because near-term demand in advanced packaging and silicon photonics is unfulfilled.
- People assume shipments divided by capacity is the rate. Actually UMC's numerator is wafer out, and 1,212 divided by 1,325 is 91.5%, while the printed rate is 92%. SMIC's shipments divided by three times month-end monthly capacity are 90.6%, while the printed rate is 97.3%.
- People assume utilization and yield are the same percentage. Actually utilization counts wafers out against capacity. Yield counts working chips on the wafer. A line can be full and still scrap dice.
- People assume every foundry prints the rate. Actually TSMC's third-quarter 2026 management report prints shipments, inventory days, and an N2 ramp sentence. GlobalFoundries' 6-K prints shipments and fixed-cost absorption. Neither document prints a utilization percentage.
FAQ
What is fab utilization? Fab utilization is wafers out divided by a foundry's capacity. UMC defines it as quarterly wafer out divided by quarterly capacity. SMIC defines it as total wafers out divided by estimated total quarterly capacity.
What did UMC print for the third quarter of 2026? UMC printed a utilization rate of 92%, wafer shipments of 1,212 thousand 12-inch equivalent wafers, and quarterly capacity of 1,325 thousand. Its definition uses wafer out, not the shipment line.
Why is 1,212 divided by 1,325 not 92%? Our arithmetic is 1,212 divided by 1,325, which is 91.5%. UMC's numerator is quarterly wafer out. The release does not print wafer out as its own number, so the shipment line does not reproduce 92%.
What did SMIC print? SMIC printed a utilization rate of 97.3% for the third quarter of 2026. Shipments were 3,033,683 standard logic 8-inch equivalent wafers. Month-end monthly capacity was 1,116,750. The filing defines the rate as wafers out divided by estimated quarterly capacity, and it does not print those two inputs.
Does TSMC print a utilization rate? No. TSMC's third-quarter 2026 management report prints wafer shipments of 4,476 thousand 12-inch equivalent wafers and 82 days of inventory. It does not print a utilization rate.
Is utilization the same as yield? No. Utilization is how much of the capacity came out as wafers. Yield is how many of the chips on a wafer work. A full fab can still lose dice to defects.
Who gets paid when a fab is full? The foundry is paid for the wafer that comes out. The buyer of a full line waits, or the foundry converts a different tool. The toolmaker is paid when capacity is added, which is a longer clock than the quarter's rate.
Is this advice to buy or sell any company? No. This page explains how a foundry prints utilization. It does not rate companies or give buy or sell calls. Not investment advice. Do your own research.
Related terms
Related: what semiconductor yield is; what a silicon wafer is; what fabless means; fabless versus IDM; what a clean room is; what a photomask is.
Markets and stack doors
Layer: Semiconductors. UMC and TSMC print on the Taiwan Markets door. SMIC's 97.3% is on the China Markets door, including the China note on SMIC's third quarter. GlobalFoundries files in the United States and prints on the US Markets door.
Get the Wire, a free daily note on who pays for AI computing.
How we check this. Rates, shipments, capacity, margins, and definitions are from UMC's release of 28 October 2026, SMIC's results filed 12 November 2026, TSMC's management report of 15 October 2026, or GlobalFoundries' 6-K exhibit filed 4 November 2026. A division of two printed lines is marked our arithmetic. Who gets paid, and the stuck step, are our read. Not investment advice. Do your own research.
Last reviewed: 19 Nov 2026 · Next review: UMC's fourth-quarter 2026 results, when utilization, wafer shipments, and capacity are reprinted
Spot an error? Tell us and we will correct it and note the change here.
Sources
- UMC — third-quarter 2026 earnings release, 28 October 2026. The formula, the 92% rate, shipments, capacity, the full-fab comments, guidance, and both capital-expenditure lines.
- SMIC — unaudited results for the three months ended 30 September 2026, 12 November 2026. The 97.3% rate and its definition, shipments, capacity, depreciation, capital expenditure, and guidance.
- TSMC — quarterly management report, third quarter 2026, 15 October 2026. Shipments, inventory days, the N2 margin sentence, capital expenditure, and depreciation. No utilization rate.
- GlobalFoundries — Form 6-K exhibit for the quarter ended 30 September 2026, filed 4 November 2026. Revenue, shipments, gross margin, fixed-cost absorption, and the underutilization-payment phrase.
Writes Second Order by TKN. Focus: who gets paid, where money sticks, and which step is stuck.